1. System Settings
Input Voltage (AC) | 250 – 470 VAC, 50 Hz |
On voltage (cold start) | 250 VAC |
Off voltage | 200 VAC |
2. Protections / Setting Parameters
Protection Design | Current Sensing |
Pump Current Range | 2 – 22 Amps. or as required |
Sr. No. | Parameter | Setting Range | Default setting | Trip Time Delay | Display | LED |
---|---|---|---|---|---|---|
1 | Phase Failure | Fixed | Fixed | 4 sec ± 1 sec | SPP | YES |
2 | Reverse Phase | Fixed | Fixed | 4 sec ± 1 sec | SPP | YES |
3 | Voltage Unbalance | Fixed | Fixed | 4 sec ± 1 sec | SPP | YES |
4 | Current Unbalance | 20% – 70% | 50% | 4 sec ± 1 sec | CUB | YES |
5 | Overload | 20% – 60% | > 140 % | 15 sec | OL | YES |
6 | Dryrun | 60% – 95% | < 75 % | 15 sec | DRN | YES |
7 | High voltage | 450 – 500 V | 480 V ± 2 V | Fixed | HIU | YES |
8 | Low voltage | 180 – 350 V | 250 V ± 2 V | Fixed | LOU | YES |
9 | Extremely High Current | Fixed | Fixed | 3 sec | EHC | NO |
3. Timers
Sr. No. | Parameter | Setting Range | Default setting | Display | LED |
---|---|---|---|---|---|
1 | Power ON Timer | 3 sec – 300 sec | 60 sec ± 3 sec | PONT | YES |
2 | Motor OFF Timer | 5 – 720 min | OFF | OFF | YES |
4. Monitoring
Digital Voltmeter | 200 – 500 V |
Digital Ammeter | 1 – 30 Amps. or as required |
5. MCB
3 Pole, 32 Amp. C Series MCB |
Short circuit as per IEC60899-1 |
6. Reset
Resetting mode | Manual by OFF switch |
7. Output Relay Contact
Relay Mechanical life | 10 lac operations |
Dielectric Strength | 2.2 KV , 50 Hz for 1 min |
8. Enclosure & Mounting
Enclosure Material | Rust Proof, Shock Proof, Industrial IP 54 Powder Coated Metal Enclosure |
Mounting | Wall Mounting with 4 screw M4 × 15 mm |
Temperature | 5 to 60°C |
Humidity | Up to 90% RH |
9. Dimensions & Weight
L × W × D (mm) | × × mm |
Power Consumption | Less than 5 Watts |
Weights | gms. |
1. Technology :
2. Current Range / HP :
3. Display :
4. Protections :
5. Timers :
6. Starter :
© 2021 Choudhary Pumps and Pipe. All Rights Reserved.